RAM MOUNTS

Description

RAM MOUNTS is fast becoming one of the most sought after accessories for electronics and has quickly become an essential mounting component for a variety of applications including automotive, industrial, military, defense, material handling and any application requiring a rugged and stable mounting solution. Manufactured in the USA (Seattle, WA), the mounting systems are made of high quality mounting materials, durable composites, steel, stainless steel, rubber and aluminum, and exceed all expectations without sacrificing cost efficiency.

Rocky mountain ridge with snow-covered tops
RAM MOUNT suction cup (RAP-224-1U)
The RAM MOUNT suction cup twist lock base, contains a standard RAM double hole diamond shaped end. The suction cup is designed to have an extra strong hold on any smooth non-porous surface. For the best result, you should mount it on a glass surface. Material: High Strength Composite Diameter: 8,26 cm

€25.80*
X-Grip III für 10-Zoll Tablets (RAM-HOL-UN9U) RAM MOUNTS
RAM MOUNTS X-Grip III für 10 Zoll Tablets

€139.80*
RAM Mount Triple Suction Cup Base (RAP-365-224-1BU)
This article consists of a triple 8,26 cm (3.3") twist lock suction cup base with plate that contains the universal AMPs hole pattern. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass surface.Material:High Strength Composite Colour: black

€78.94*
RAM MOUNT Base Plate round
Material: Powder Coated Marine Grade Aluminum Ball diameter: 2,54 cm (1 Inch) Size: 63,5 mm (2,5 Inch)  Colour: black Weight: approx. 68 g Part number: RAM-B-202U

€14.80*
RAM MOUNT Base Plate Trapez, B-Ball
Material: Powder Coated Marine Grade Aluminum Ball diameter: 2,54 cm (1 Inch) Size: 62 mm x 33 mm (2,43" x 1,31") Weight: approx. 46 g Colour: black Part number: RAM-B-238U  

€13.49*
RAM Mount Double Socket Arm for 1" Balls (RAM-B-201U)
Material: Powder Coated Marine Grade Aluminum Length: 93,7 mm (3,69") Ball Diameter: 2,54 cm (1") Weight: approx.145 g Colour: black Part number: RAM-B-201U-A    

€34.80*
RAM MOUNT Base Plate with C-Ball (1,5 Inch)
The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Diameter : 3,81 cm Rubber Ball (1.5 Inch) Base Diameter: 6,35 cm (2.5 Inch) Colour: black Weight: 105 g Part number: RAM-202U

€23.80*
Flex-Arm mit 6 Zoll Saugnapf und Trapez, oval (RAP105-6D224U) RAM MOUNTS
Hoch qualitativer Saugnapf inkl. Flex-Arm (ca. 15 cm) mit fixierter, ovaler Basisplatte, die an viele Gerätehalter passt. Material: Hochfestigkeits-Verbundstoff Farbe: schwarz Gewicht: ca. 127g

€45.95*
SET: Saugnapf, Verbinder, Trapez + Basisplatte (RAM-B-166-202U) RAM MOUNT
Material: Pulverbeschichtetes Aluminium (Saugnapf aus Hochfestigkeits-Verbundstoff) Kugeldurchmesser: 2,54 cm (1 Inch) Farbe: schwarz Hinweis: Gerätehalter muss noch ergänzt werden!  

€77.00*
HIGHLIGHT
Halter - Apple iPad mini 6 (RAM-HOL-AP36U) RAM MOUNTS
The Cradle consists of a high strength composite. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Material: High Strength Composite Base Plate Socket: Round Weight: approx.192g Part number: RAM-HOL-AP14U   Note:This product is NOT recommended for devices with a Glass Screen Protector. In addition to this you have to remove all kind of cases or sleeves prior useing this cradle.

€39.81*
Halterung Apple iPad mini 1-3 (RAM-HOL-AP14U) RAM MOUNTS
The Cradle consists of a high strength composite. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Material: High Strength Composite Base Plate Socket: Round Weight: approx.192g Part number: RAM-HOL-AP14U   Note:This product is NOT recommended for devices with a Glass Screen Protector. In addition to this you have to remove all kind of cases or sleeves prior useing this cradle.

€29.80*
RAM MOUNT Yokemount, B-Ball
Material: Powder Coated Marine Grade Aluminum and High Strength Composite Ball diameter: 2,54 cm (1 Inch) Size: 94 mm x 79 mm x 14mm (37" x 31,1" x 5,5") Opening: 15,8 mm - 31,8 mm (0,625"-1,25") Weight: approx. 159 g Part number: RAM-B-121BU  

€54.80*
SET: X-Grip IV mit Saugfusshalterung (RAM-B-166-UN10U) RAM MOUNT
Diese stabile X-Grip IV Saugfusshalterung (RAM-B-166-UN10U) eignet sich hervorragend als Universallösung für große Smartphones oder Phablets. Das RAM MOUNTS X-Grip IV System sorgt mit den Gummi-Fingern für sicheren Halt, ohne dabei die Geräte hinter Abdeckungen zu verstecken. Die RAM MOUNTS Halteklammer ist mit folgenden Artikeln kompatibel: HTC Droid DNA Huawei Ascend P1 LG Intuition Nokia Lumia 920 Pantech Vega No. 6 Samsung GALAXY Mega 5.8 Samsung GALAXY Mega 6.3 Samsung GALAXY Note II Alle Geräte, welche die folgenden Vorgaben für die Mindestabmessungen erfüllen X-Grip IV Gerätehalter (Mindestabmessungen): Minimum Breite = 4,45 cm Maximum Breite = 11,43cm Max. Tiefe = 2,22 cm X-Grip IV Produktmerkmale: Federgestützte Spannung der Haltearme Mit Gummi überzogene Haltefinger Die Vielseitigkeit des Halters macht zahlreiche Halterlösungen möglich B-Kugel zur Anbindung an zahlreiche RAM MOUNT Produkt  

€89.90*
Halteschale für Apple iPad 6/Air/Air2/Pro 9,7 (RAM-HOL-AP17U) RAM MOUNTS
Die Gerätehalteschale RAM-HOL-AP17U ist passend für das Apple iPad Air - ohne Schutzgehäuse oder -hüllen. Die Rückseite der Halteschale ist zur Aufnahme von runden Basisplatten (B- oder C-Kugel) vorbereitet. Auch bei eingelegtem Tablet haben Sie weiterhin leichten Zugang zu den Anschlüssen/Schnittstellen des Gerätes. Das patentierte Rollbügelsystem zur Gerätefixierung an der Oberseite sorgt für schonende Einlage und leichte Entnahme des Tablets. Hinweis: erfordert runde Basisplatte, die gesondert bestellt werden muss! Produktmerkmale Das patentierte Rollbügelsystem ermöglicht eine schnelle Einlage und Entnahme des Gerätes Zwei vorbereitete Verbindungspunkte auf der Rückseite, vorbereitet für die Aufnahme runder Basisplatten (B- oder C-Kugel) Passend für verschiedene Modelle des Apple iPad - ohne Schutzgehäuse oder -hülle Die Halteschale eignet sich zum Einsatz in Umgebungen mit geringen als auch mit starken Vibrationen Aufnahme Rückseite: vorbereitet für runde Basisplatten (B- oder C-Kugel) Passend für: iPad 5. + 6. Generation iPad Air iPad Air 2 iPad Pro 9,7

€35.00*
RAM MOUNT Universal X-Grip IV Cradle
Mit seinen Gummi-Fingern sorgt das RAM MOUNT X-Grip IV System für sicheren Halt Ihrer großen Smartphones oder Phablets.

€49.94*
RAM MOUNT Tab-Tite Cradle for the Google Nexus 7
This Cradle consists of a spring loaded back plate and support cups for the Google Nexus 7. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. The cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Material: High Strength Composite Cradle Dimensions: Height: 7.5" to 10.125" Width: 3.75" to 4.7" Depth: 0.13" to 0.43

€32.80*
Saugfußhalterung für Apple iPad mini (RAM-B-166-AP14U) RAM MOUNTS
Diese Saugfußhalterung ist eine stabile Befestigungslösung für das Apple iPad mini. Sie besteht aus einem Saugfuss, einer Trapez-Basisplatte, einem Verbinder, einer runden Basisplatte und einer iPad mini Halteschale. Die Halterung ist schnell auf glatten

From €64.80*
Beinhalterung (RAM-BM-L1) RAM MOUNTS
Mit dieser Beinhalterung für den Oberschenkel mit verstellbaren Gummibändern können Sie Ihre elektronischen Geräte nah am Körper platzieren. Die Halterung passt nahezu an alle RAM MOUNTS Gerätehalterschalen. Material: Hochfestigkeits-Verbundstoff / Gummiband Farbe: schwarz

€31.95*
HIGHLIGHT
RAM MOUNTS iPad Pro 12.9 holder (RAM-HOL-AP26U), 3. generation
Gerätehalteschale für iPad Pro 11

€51.96*
HIGHLIGHT
RAM MOUNTS Holder for iPad 7+8+9th generation (RAM-HOL-AP31U)
Gerätehalteschale für iPad 7th + 8th + 9th Gen

€42.80*
RAM MOUNT Universal X-Grip Cradle for 7" Tablets(RAM-HOL-UN8BU)
The RAM MOUNT X-Grip consists of a spring loaded cradle and 1" rubber ball connected to the back of the base.  It expands and contracts for perfect fit of most 7" tablets. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Material: Marine Grade Stainless Steel Components and High Strength Composite Ball diameter: 2,54cm (1 Inch)

€79.80*
SET: X-Grip II mit Saugfusshalterung (RAM-B-166-UN8U) RAM MOUNTS
Diese stabile X-Grip II Saugfusshalterung (RAM-B-166-UN8U) eignet sich hervorragend als Universallösung für 7-Zoll Tablets. Das RAM MOUNTS X-Grip II System sorgt mit den Gummi-Fingern für sicheren Halt, ohne dabei die Geräte hinter Abdeckungen zu verstecken. Die X-Grip II RAM MOUNTS Halteklammer ist mit folgenden Artikeln kompatibel: Amazon Kindle - mit oder ohne Schutzgehäuse Amazon Kindle Fire - mit oder ohne Schutzgehäuse Amazon Kindle Fire HD - mit oder ohne Schutzgehäuse Apple iPad mini - mit oder ohne Schutzgehäuse Samsung Galaxy Tab (7" version) - mit oder ohne Schutzgehäuse Samsung Galaxy Tab 7.0 Plus - mit oder ohne Schutzgehäuse Die meisten 7-Zoll Tablets sowie alle Geräte mit den nachfolgend aufgeführten Mindestabmessungen X-Grip II Gerätehalter (Mindestabmessungen): Minimum Breite 5,72 cm (Geräte mit einer Breite von 5,72 cm müssen mind. 17,78 cm hoch sein, um zu halten) Maximum Breite = 14,6 cm Tiefe = 2,2 cm X-Grip II Produktmerkmale: Federgestützte Spannung der Haltearme Mit Gummi überzogene Haltefinger Leichter Zugang zu den Griffknöpfen auf der Rückseite für schnelle Entnahme des Tablets Die komplette Saugfusshalterung X-Grip II besteht aus: 1x Saugfuss-Basis mit Drehverschluss, Hochfestigkeits-Verbundstoff, Durchmesser: 8,26 cm 1x Trapez Basisplatte (B-Kugel, 1 Zoll), Breite 32 mm, Länge 64 mm, Lochabstand 48,6 mm (jeweils von der Lochmitte), Pulver beschichtetes Aluminium 1x Verbindungsarm mittel (ca. 90 mm) 1x X-Grip II Halteklammer (wie oben beschrieben)

€129.81*
Steuerhornhalterung, 9cm, runde Platte (RAM-B-121-202U) RAM MOUNTS
Die RAM MOUNT Steuerhornhalterung RAM-B-121-202U besteht aus einer Halteklammer (Öffnung bis zu 31,7 mm), einem mittleren Verbindungsarm (ca. 90 mm) und einer runden Basisplatte. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer um ein Rohr legen und die Schraube festziehen - geeignet für Mietflugzeuge und sonstige mobile Einsatzzwecke. Hinweis: Gerätehalter muss noch ergänzt werden!

€68.00*
RAM MOUNT Short Double Socket Arm for 1" Balls (RAM-B-201U-A)
  Material: Powder Coated Marine Grade Aluminum Length: 60,4 mm (2,38") Ball Diameter: 2,54 cm (1") Weight: approx.96 g Colour: black Part number: RAM-B-201U-A

€23.00*
HIGHLIGHT
Halter - Apple iPad mini 4 / 5 (RAM-HOL-AP20U) RAM MOUNTS
The Cradle consists of a high strength composite. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Material: High Strength Composite Base Plate Socket: Round Weight: approx.192g Part number: RAM-HOL-AP14U   Note:This product is NOT recommended for devices with a Glass Screen Protector. In addition to this you have to remove all kind of cases or sleeves prior useing this cradle.

€29.80*
Halter für Apple iPhone RAM MOUNT
Original RAM MOUNT Halter für das Apple iPhone. (1. Generation)Material: Hochfestigkeits-Verbundstoff.Farbe: schwarz.Gewicht: ca. 40 g.

€11.10*
RAM Tough Tray II Universal Netbook Holder (RAM-234-6)
Spring loaded to create just the right amount of holding force, most tablets, and compact laptops can be made safe and secure while on the go with the Tough Tray II Holder . Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM. Dimensions: Tray Depth: 15,24 cm (6.0") Tray Thickness: 2,54 cm (1") Tray Width (Expansion):21,74 cm - 31,27 cm (8.56" - 11.12") Side Clamp Arm Height: 6,99cm (2.75") max. Material: High Strength Composite Colour: black

€29.90*
RAM MOUNT Universal X-Grip IV Cradle
RAM Mounts Quick-Grip Halteschale für Smartphones mit Ladefunktion (QI kompatibel), spritzwassergeschützt, USB-A Schnittstelle, inkl. Diamond-Basisplatte (Trapez).

€198.94*
RAM MOUNT base plate with 2 balls, B-Ball
This base plate consists of two 1" diameter rubber balls connected to a post. The round base (2,5") has pre-drilled holes, including the universal AMPs hole pattern and 3-hole 120 degree pattern. Material: Powder Coated Marine Grade Aluminum Ball diameter: 2,54 cm (1") Part number RAM-B-217U

€73.95*
RAM MOUNT base plate with 2 balls, B-Ball
This base plate consists of two 1" diameter rubber balls connected to a post. The round base (2,5") has pre-drilled holes, including the universal AMPs hole pattern and 3-hole 120 degree pattern. Material: Powder Coated Marine Grade Aluminum Ball diameter: 2,54 cm (1") Part number RAM-B-217U

€59.95*
RAM MOUNT base plate with 2 balls, B-Ball
This base plate consists of two 1" diameter rubber balls connected to a post. The round base (2,5") has pre-drilled holes, including the universal AMPs hole pattern and 3-hole 120 degree pattern. Material: Powder Coated Marine Grade Aluminum Ball diameter: 2,54 cm (1") Part number RAM-B-217U

€218.95*
RAM MOUNT base plate with 2 balls, B-Ball
This base plate consists of two 1" diameter rubber balls connected to a post. The round base (2,5") has pre-drilled holes, including the universal AMPs hole pattern and 3-hole 120 degree pattern. Material: Powder Coated Marine Grade Aluminum Ball diameter: 2,54 cm (1") Part number RAM-B-217U

€63.95*
RAM® Tab-Tite™ Tablet Holder for Samsung Galaxy Tab E 9.6 (RAM-HOL-TAB31U)
Halterung speziell für das Samsung Galaxy Tab S2 8.0

€55.95*
RAM® Tab-Tite™ Tablet Holder for Samsung Galaxy Tab E 9.6 (RAM-HOL-TAB31U)
Halterung speziell für das Samsung Galaxy Tab E 9.6

€36.79*
RAM MOUNT Yokemount, B-Ball
Material: Powder Coated Marine Grade Aluminum and High Strength Composite Ball diameter: 2,54 cm (1 Inch) Size: 94 mm x 79 mm x 14mm (37" x 31,1" x 5,5") Opening: 15,8 mm - 31,8 mm (0,625"-1,25") Weight: approx. 159 g Part number: RAM-B-121BU  

€42.95*
RAM MOUNT Universal X-Grip IV Cradle
RAM Mounts Tough-Charge X-Grip Halteklammer für Smartphones mit Ladefunktion (QI kompatibel), spritzwassergeschützt, USB-A Schnittstelle, inkl. Diamond-Basisplatte (Trapez).

€237.95*
Armhalterung mit Gummiband (RAM-BM-A1) RAM MOUNTS
Mit diese Armhalterung mit verstellbarem Gummiband können Sie Ihre elektronischen Geräte nah am Körper platzieren. Die Halterung passt nahezu an alle RAM MOUNTS Gerätehalterschalen. Material: Hochfestigkeits-Verbundstoff / GummibandFarbe: schwarz

€23.50*
RAM MOUNT Lock Cradle for the Apple iPad mini (RAM-HOL-TABL11U)
Die universelle, abschließbare RAM MOUNT Halteschale RAM-HOL-TABL11U besteht aus einer verstellbaren Rückplatte mit Spannfeder, einem Verschlussmechanismus und den passenden Endstücken zur Aufnahme von Apple iPad mini (mit Schutzhüllen).

€64.00*
HIGHLIGHT
RAM MOUNTS iPhone 11 Pro holder (RAM-HOL-AP29U)
Gerätehalteschale für iPhone 11 Pro Max

€12.82*
RAM MOUNT base plate with 2 balls, B-Ball
This base plate consists of two 1" diameter rubber balls connected to a post. The round base (2,5") has pre-drilled holes, including the universal AMPs hole pattern and 3-hole 120 degree pattern. Material: Powder Coated Marine Grade Aluminum Ball diameter: 2,54 cm (1") Part number RAM-B-217U

€62.00*
RAM MOUNT Composite Handlebar Swivel Base
This article consists of a locking tooth system with a standard diamond plate end. The mount will accommodate rails up to 1" in diameter. The hole pattern found on the diamond base adapter will connect to most RAM cradles.   Material: High Strength Composite rail diameter: 2,54 - 2,79 cm Opening: approx. 24 mm (10,2") deep, 28 mm (11") high Weight: approx.60 g Part number: RAP-274  

€12.90*
RAM MOUNT Adapter for Garmin (RAM-HOL-GA22)
The RAMMOUNT adapter for Garmin devices consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM MOUNT components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS. Material:High Strength Composite Colour: black Weight: approx. 27 g.

€14.95*
RAM MOUNT Universal Finger-Grip Cradle (RAM-HOL-UN4U)
This Cradle is designed to hold a large amount of smartphones and other electronic devices. The cradle comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the cradle includes a back plate that adds support to the device being held by the mount. Dimensions: Height Dimensions: Minimum with Top and Bottom Plates: 5.25" Maximum with Top and Bottom Plates: 6.0" The top and bottom plates can be removed for larger devices. Spine Plate Dimensions: 2.5" Width x 5" Height Using Short Arm Side Clamps: Maximum Depth: 0.75" Minimum Width: 1.25" Maximum Width: 3.0" Using Medium Arm Side Clamps: Maximum Depth: 1.25" Minimum Width: 1.5" Maximum Width: 3.5" Using Long Arm Side Clamps: Maximum Depth: 1.6" Minimum Width: 2.25" Maximum Width: 3.5" Material: High Strength Composite Base Plate Socket: Trapez Weight: approx. 150g

€42.80*
RAM High Strength Composite Spring Loaded Cradle for Cell Phones (RAM-HOL-PD3U)
This RAM MOUNT Cradle  is designed to hold different kinds of cell phones as well as other small electronic devices. The cradle contains adjustable side clamps that close tightly on the item you want to hold. Material: High Strength Composite Cradle Clamping Dimensions: Height Range: 4.75" - 6.25" Width Range: 2.25" - 3.25"

€42.95*
Kompletthalter mit Trapez Basis RAM MOUNTS
Basisplatte (Trapez): Material: Puder beschichtetes Aluminum. Kugeldurchmesser: 2,54 cm (1 Inch). Breite: 3,2 cm. Länge: 6,4 cm. Lochabstand: 4,86 cm (jeweils von der Lochmitte). Farbe: schwarz. Verbinder (90 mm): Material: Puder beschichtetes Aluminum Kugeldurchmesser: 2,54 cm (1 Inch) Farbe: schwarz Gesamtgewicht des Kompletthalters: ca. 180 g

€29.80*
RAM Tab-Lock Locking Cradle for 10" Tablets
Keep your devices safe with the new RAM MOUNT Tab-Lock™ tablet cradle.The cradle doesn´t only looks great and performs flawlessly, but it is also compatible with RAM's full line of mounting solutions ideally suited for personal and fleet use. compatible withe the following devices: Apple iPad Apple iPad 2 Apple iPad 3 Apple iPad HD Asus EEE Pad Asus Eee Pad Transformer HP TouchPad Lenovo LePad Slate LG G-Slate LG Optimus Pad Motorola XOOM Motorola XOOM 2 10.1 Pandigital R90A200 Samsung Galaxy Tab 8.9 Samsung Galaxy Tab 10.1 Samsung Galaxy Tab 2 10.1 Toshiba Thrive as well as every other 10" device, which fits with the following dimensions Cradle Dimensions Height: 8.25" minimum to 10.25" maximum Width: Maximum to 7.75" Edge Depth: Maximum to 0.56" Material: High Strength Composite  

€156.95*
RAM MOUNT Base Plate with C-Ball (1,5 Inch)
Diese RAM MOUNT Basisplatte mit VESA-Lochmusterplatte und einer gummierten C-Kugel eignet sich zur Anbringung an glatten, vertikalen oder horizontalen Flächen.

€31.00*
RAM MOUNTS Tough-Wedge (Seat Wedge Mount) RAM-B-407-PUMPU
Bügelbefestigung für Stangen

€31.80*
Saugnapfhalterung für Apple iPad RAM MOUNTS
Bestehend aus einem Saugfuß mit Drehverschluss, einer Trapezbasisplatte, einem Verbinder, einer runden Basisplatte und einem iPad-Gerätehalter für Apple iPad 2, ist diese RAM MOUNT Saugfußhalterung eine stabile Befestigungslösung.

€78.00*
HIGHLIGHT
RAM MOUNTS Tough-Wedge (Seat Wedge Mount) RAM-B-407-PUMPU
RAM MOUNT Halter für Notizblöcke ab Format A6

€99.95*
HIGHLIGHT
RAM MOUNTS iPad Pro 12.9 holder (RAM-HOL-AP26U), 3. generation
Basiskugel mit 1/4"-20 Gewindestift - für Kamera-Anbindung

€12.82*
HIGHLIGHT
RAM MOUNTS iPhone 11 Pro holder (RAM-HOL-AP29U)
Gerätehalteschale für iPhone 11 Pro

€12.82*
HIGHLIGHT
RAM MOUNTS Holder for iPad 7th generation (RAM-HOL-AP31U)
ERSATZ-GUMMIFINGER FÜR X-GRIP

€10.00*
SET: Panelhalterung für Apple iPad mini (RAM-B-177-AP14U) RAM MOUNTS
Die Panelhalterung für das Apple iPad mini besteht aus einer Panelklammer (Öffnung 28 mm hoch, 24 mm tief), einem Verbinder (90 mm), einer runden Basisplatte und der iPad mini Halteschale. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer auf den Panelvorsprung schieben und die Schrauben festziehen - somit ideal für Mietflugzeuge und sonstige mobile Einsatzzwecke geeignet. Material: Pulverbeschichtetes Aluminum, Hochfestigkeits-Verbundstoff (Halteschale) Öffnung Klammer: 28 mm hoch, 24 mm tief Kugeldurchmesser: 2,54 cm (1 Zoll), B-Kugel Farbe: schwarz

From €67.79*
RAM Mount Rail Base, B-Ball
The Railbase consists of a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails with a diameter of 0.5" to 1.25". The black cover caps icluded can be placed over the exposed ends of the u-bolt to narrow the rail to a minimum width of 0.5".   Material: Powder Coated Marine Grade Aluminum, zinc coated metal Ball diameter:  2,54 cm (1 Inch)Opening: 12,7 mm - 31,8 mm (0,5" - 1,25") Weight: ca. 87 g Colour: black Part number: RAM-B-231ZU

€28.91*
Flex-Arm (Schwanenhals), 6 Zoll, 15,24 cm (RAP-105-6DDU) RAM MOUNTS
Dieser "Schwanenhals" mit einer Länge von 15,24 cm hat an beiden Enden fixierte, ovale Basisplatten, die an viele Gerätehalter passen. Material: Hochfestigkeits-Verbundstoff Farbe: schwarz Gewicht: ca. 60g

€23.80*
Steuerhornhalterung mit Trapez-Basisplatte RAM MOUNTS
Die Steuerhornhalterung besteht aus einer Halteklammer (Öffnung bis zu 31,7 mm), einem Verbinder (90 mm) und einer Trapez-Basisplatte. Diese Universalhalterung ist leicht zu befestigen - einfach die Klammer um ein Rohr legen und die Schraube festziehen.Diese Halterung eignet sich ideal für Mietflugzeuge bzw. nicht standardisierte Motorradlenker. Material: Puder beschichtetes AluminumÖffnung Klammer: bis 31,7 mmKugeldurchmesser: 2,54 cm (1 inch)Farbe: schwarzGewicht: ca. 310 g

€69.00*
SET: Panelhalterung für Apple iPad Air (RAM-B-177-AP17U) RAM MOUNTS
Die Panelhalterung RAM-B-177-AP17U für das Apple iPad Air besteht aus einer Panelklammer (Öffnung 28 mm hoch, 24 mm tief), einem mittleren Verbindungsarm (ca. 90 mm), einer runden Basisplatte und der iPad Air Gerätehalteschale. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer auf den Panelvorsprung schieben und die Schrauben festziehen - somit ideal für Mietflugzeuge und sonstige mobile Einsatzzwecke geeignet. Öffnung Klammer: 28 mm hoch, 24 mm tiefKugeldurchmesser: 2,54 cm (1 Zoll, B-Kugel)

€75.01*
RAM MOUNT Cradle for the Apple iPhone 6 Plus and 6s Plus (RAM-HOL-AP19U)
Material: High Strength Composite Base Plate Socket: Trapeze Weight: approx. 120g Part number: RAM-HOL-AP19U

€13.99*
Beinhalterung SnapLink (RAM-BM-L1-SBU) RAM MOUNTS
Die RAM MOUNT Beinhalterung - RAM-BM-L1-SBU besteht aus der Beinhalterung mit Gummizugbefestigung. Die Beinhalterung ist eine ideale Lösung, wenn man ein iPad oder Tablett in naher Umgebung benötigt, oder wenn im Flugzeugcockpit wenig Platz für andere Bef

€33.00*
SET: X-Grip III mit Saugfußhalterung für 10" Tabletts (RAM-B-166-UN9U) RAM MOUNTS
Das RAM MOUNT X-Grip System ist mit dem durch seine Gummi-Finger gesicherten Halt bestens als Universallösung für 10-Zoll Tablets geeignet. Die Halterung versteckt die Geräte nicht hinter einer Abdeckungen und bietet so leichten Zugang zu allen Anschlüsse

€138.00*
RAM MOUNT V-Shape Base for Rails and Yokes (RAM-B-108BU)
The V-Shape Base consists of a 1" diameter rubber ball connected to a v-shaped base. The base accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the article please place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 2,54cm (1 Inch)Colour: black  

€37.95*
X-Grip für 12" Tablets (RAM-HOL-UN11U) RAM MOUNTS
Gerätehalterung X-Grip für 12" Tablets

€148.95*
RAM MOUNT GoPro Hero Adapter (RAP-B-202U-GOP1)
The article consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Material: Composite material Ball diameter: 2,54 cm (1 Inch) Weight: ca. 20 g Part number: RAP-B-202U-GOP1

€80.00*
RAM MOUNT Tab-Tite Cradle for Samsung Tab 4 8'' (RAM-HOL-TAB24U)
The  RAM MOUNT Tab-Tite™ cradle is designed for Samsung Tab 4 8'' and compatible with other 8" tablets   Material: High Strength Composite Base Plate Socket: Round    

€51.00*
RAM MOUNT Cradle for Apple iPad (RAM-HOL-AP8U)
This Cradle is compatible with Apple iPad 1, 2, 3 & 4   Note: You have to remove any kind of cases or sleeves prior useing this cradle ! Material: High Strength Composite Base Plate Socket: Round Colour: black Part number: RAM-HOL-AP8U

€85.00*
RAM MOUNT Cradle for Apple iPad (RAM-HOL-AP8U)
This Cradle is compatible with Apple iPad 1, 2, 3 & 4   Note: You have to remove any kind of cases or sleeves prior useing this cradle ! Material: High Strength Composite Base Plate Socket: Round Colour: black Part number: RAM-HOL-AP8U

€48.80*
HIGHLIGHT
RAM MOUNTS iPhone XR holder (RAM-HOL-AP26U)
Gerätehalteschale für iPhone XR

€18.47*
HIGHLIGHT
RAM MOUNTS iPad Pro 12.9 holder (RAM-HOL-AP26U), 3. generation
Gerätehalteschale für iPad Pro 12.9

€51.96*
Steuerhornhalterung für Apple iPad mini (RAM-B-121-AP14U) RAM MOUNTS
Die Steuerhornhalterung für das Apple iPad mini besteht aus einer Halteklammer (Öffnung bis zu 31,7 mm), einem Verbinder (90 mm), einer runden Basisplatte und der Apple iPad mini Halteschale. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer um ein Rohr legen und die Schraube festziehen - geeignet für Mietflugzeuge und sonstige mobile Einsatzzwecke. Produkteigenschaften Material: Pulverbeschichtetes Aluminum, Hochfestigkeits-Verbundstoff (Halteschale) Öffnung Klammer: von 15,9 bis 31,7 mm Kugeldurchmesser: 2,54 cm (1 Zoll), B-Kugel Farbe: schwarz

From €89.00*
Beinhalterung - Apple iPad mini RAM MOUNTS
Die Beinhalterung für das Apple iPad mini besteht aus der Beinhalterung mit Gummizugbefestigung und dem iPad mini Gerätehalter. Die Beinhalterung ist eine ideale Lösung, wenn man das iPad mini in naher Umgebung benötigt, oder wenn zum Besispiel im Flugzeugcockpit wenig Platz für andere Befestigungslösungen vorhanden ist. Für iPad Mini Version 1-3 

€38.90*
RAM MOUNT Glareshield Clamp Base with 1" Ball
The Clamp is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. When tightened, the 2 composite bolts clamp the base to the lip surface. Material: Powder Coated Marine Grade Aluminum Ball diameter:  2,54 cm (1") Opening: approx. 24 mm (10,2") deep, 28 mm (11") high Weight: approx.150 g Part number: RAM-B-259U

€57.95*
RAM Mount Suction Cup base with RAP-Connector (RAP-B-102-224U-QU1)
Material: High Strength Composite Ball diameter: 2,54 cm (1 Inch) Colour: black      

€38.00*
SET: Saugnapfhalterung mit Trapez-Anschluss RAM MOUNTS
Stabile Saugfußhalterung aus Verbundstoff mit Trapez-Anschluss zur sicheren Montage elektronischer Geräte an Windschutzscheiben oder glatten Oberflächen.

€39.81*
RAM MOUNT Double Ball Adapter (RAM-B-230U)
Material: Powder Coated Marine Grade Aluminum Ball diameter: 2,54 cm (1 Inch) Length: 6,6 cm (2,58 Inches) Weight: approx. 41g

€29.80*
Universal Tab-Tite Halteschale für 10 Zoll Tablets (RAM-HOL-TAB8U) RAM MOUNTS
Diese universelle Tab-Tite Gerätehalteschale RAM-HOL-TAB8U ist geeignet für 10 Zoll Tablets mit oder ohne Schutzgehäusen. Zur Größenanpassung ziehen Sie den Tab-Tite Halter auseinander, legen das Tablet ein und schieben den Halter anschließend wieder zusammen. Die Rückseite der Gerätehalteschale ist für die Aufnahme einer Trapez-Basisplatte (nicht im Lieferumfang enthalten) vorbereitet. Die Tab-Tite Gerätehalteschale (RAM-HOL-TAB8U) eignet sich für folgende Geräte: 10 Zoll Tablets mit oder ohne Schutzgehäusen 10 Zoll Tablets mit OtterBox Gehäusen 10 Zoll Tablets mit Gumdrop Drop Tech Gehäusen 10 Zoll Tablets mit Griffin Technology Gehäusen 10 Zoll Tablets mit Belkin Gehäusen und alle Tablets mit folgenden Mindestabmessungen: Höhe: mind. 21,59 bis max. 26,67 cm Breite: bis max. 20,62 cm Tiefe: bis max. 2,84 cm Empfohlene Anwendung: Umgebungen mit geringer Vibration Aufnahme Rückseite: Basisplatte (nicht im Lieferumfang enthalten)

€48.00*
SET: Steuerhorn-Halterung für Apple iPad Air (RAM-B-121-AP17U) RAM MOUNTS
Die Steuerhornhalterung RAM-B-121-AP17U für das Apple iPad Air (ohne Schutzgehäuse oder -hülle) besteht aus einer Halteklammer (Öffnung bis zu 31,7 mm), einem mittleren Verbindungsarm (ca. 90 mm), einer runden Basisplatte und der Apple iPad Air Gerätehalteschale. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer um ein Rohr legen und die Schraube festziehen - geeignet für Mietflugzeuge und sonstige mobile Einsatzzwecke. Material: Pulverbeschichtetes Aluminum, Hochfestigkeits-Verbundstoff (Halteschale)Öffnung Klammer: von 15,9 bis 31,7 mmKugeldurchmesser: 2,54 cm (1 Zoll, B-Kugel)Farbe: schwarz

€89.00*
Saugnapfhalterung (RAM-B-166-AP17U) für Apple iPad Air RAM MOUNT
Die Saugfusshalterung RAM-B-166-AP17U ist eine stabile Befestigungslösung für das Apple iPad Air (ohne Schutzgehäuse oder -hülle). Die Kompletthalterung besteht aus einem Saugfuss (mit Drehverschluss), einer Trapez-Basisplatte, einem mittleren Verbindungsarm (ca. 90 mm), einer runden Basisplatte und der iPad Gerätehalteschale. Die Halterung ist schnell auf glatten Oberflächen montiert. Das patentierte Kugel-Arm-System ermöglicht individuelle Ausrichtungen und die Einstellung verschiedener Betrachtungswinkel. Kugeldurchmesser: 2,54 cm (1 Zoll, B-Kugel)

€75.01*
RAM MOUNT Tough-Claw with 1" Diameter Rubber Ball (RAP-B-400U)
The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal to mount tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Material: High Strength Composite and Stainless Steel Hardware Ball diameter: 2,54 cm (1 Inch) Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14"  

€59.80*
RAM MOUNT GoPro Hero Adapter (RAP-B-202U-GOP1)
The article consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Material: Composite material Ball diameter: 2,54 cm (1 Inch) Weight: ca. 20 g Part number: RAP-B-202U-GOP1

€22.80*
RAM Dual Articulating Suction Cup Base (RAM-B-189B-PIV1U)
Die RAM MOUNT Gelenk-Saugfussbasis eignet sich ideal zur sicheren Anbringung an gebogenen bzw. gewölbten Flächen und Scheiben.

€159.00*
SET: X-Grip mit Saugfusshalterung für Smartphones RAM MOUNTS
Diese X-Grip Saugfusshalterung für Smartphones (RAM-B-166-UN7) besteht aus einer Saugfussbasis mit Drehverschluss einem kurzen Verbindungsarm (ca. 90 mm) und dem X-Grip Universalhalter für Smartphones und kleine elektronische Geräte. Das Kugelsystem ermöglicht nahezu alle Justierungen Ihrer Geräte. Das RAM MOUNTS X-Grip System sorgt mit den Gummi-Fingern für sicheren Halt von Smartphones und anderer elektronischer Kleingeräte, ohne dabei die Geräte hinter Abdeckungen zu verstecken. Die RAM MOUNTS Halteklammer ist mit folgenden Artikeln kompatibel: Apple iPhone 6 mit und ohne Schutzhülle Apple iPhone 5S / 5C mit und ohne Schutzhülle Apple iPhone 4S mit und ohne Schutzhülle Apple iPhone 4 mit und ohne Schutzhülle Apple iPhone 3G mit und ohne Schutzhülle Apple iPhone 3 mit und ohne Schutzhülle Apple iPhone (1. Generation) Apple iPod Touch (alle Modelle) Apple iPod (Generation 1-5) sowie alle Geräte, welche die folgenden Vorgaben für die Mindestabmessungen erfüllen X-Grip Gerätehalter (Mindestabmessungen): Minimum Breite = 2,23 cm (Geräte mit Minimum-Breite müssen mind. 10,16 cm hoch sein, um gehalten zu werden) Maximum Breite = 8,26 cm Max. Tiefe = 2,23 cm X-Grip IV Produktmerkmale: Federgestützte Spannung der Haltearme Mit Gummi überzogene Haltefinger Die Vielseitigkeit des Halters macht zahlreiche Halterlösungen möglich

€54.00*
SET: Panelhalterung mit Klammer inkl Verbinder / Basisplatte (RAM-B-177-202U) RAM MOUNTS
Die Panelhalterung RAM-B-177-202U besteht aus einer Panelklammer (Öffnung 28mm hoch, 24mm tief), einem Verbinder (60 mm) und einer runden Basisplatte. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer auf den Panelvorsprung schieben und die Schrauben festziehen - somit ideal für Mietflugzeuge und sonstige mobile Einsatzzwecke geeignet. Hinweis: Gerätehalter muss noch ergänzt werden!

€59.00*
RAM MOUNT Universal Medium Tough-Clamp (RAP-B-397-2U)
The RAM MOUNT Tough-Clamp™ includes a 1" ball which can be used to mount a variety of products utilizing RAM's vast selection of mounting solutions. Attach your GoPro Camera, Smartphone, RAM AQUA BOX® Pro or similar light weight device on almost any flat surfaces and square rails.  Clamping Dimensions: Flat surfaces and square rails from 0" to 1.75" thick Round rails from 0.75" to 1.125" OD Ball Size: 1" Rubber Ball "B" Size (2,54 cm) Features RAM MOUNT Tough-Clamp RAP-B-397-2U: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Swiveling jaw-end pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes 1" rubber ball is compatible with numerous RAM arms and mounts Small, sleek form factor that accommodates for small, tight spaces Built-in lanyard holes Quick engage and release of clamp Lifetime Warranty!

€37.04*
RAM MOUNT Cradle for Apple iPad (RAM-HOL-AP8U)
This Cradle is compatible with Apple iPad 1, 2, 3 & 4   Note: You have to remove any kind of cases or sleeves prior useing this cradle ! Material: High Strength Composite Base Plate Socket: Round Colour: black Part number: RAM-HOL-AP8U

€35.80*
RAM MOUNTS Tough-Wedge (Seat Wedge Mount) RAM-B-407-PUMPU
Sitzkeilhaltung für Lücke zwischen Sitz und Mittelkonsole oder Außenwand, auch für Rücksitzanwendungen.

€154.95*
RAM MOUNT Long Double Socket Arm for 1" Balls (RAM-B-201U-C)
Verbinder für 1-Inch-Kugel 23 cm

€84.95*
RAM MOUNT Long Double Socket Arm for 1" Balls (RAM-B-201U-C)
  Material: Powder Coated Marine Grade Aluminum   Length: 152,4 mm (6")   Ball Diameter: 2,54 cm (1")   Weight: approx. 250 g   Colour: black Part number: RAM-B-201U-C        

€44.80*
RAM MOUNT Universal X-Grip (RAM-HOL-UN7BU)
The RAM MOUNT X-Grip® Cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your device. The RAM MOUNT X-Grip Cradle is compatible with the following devices: Apple iPhone 5 Apple iPhone 4S Apple iPhone 4 Apple iPhone 3G Apple iPhone 3 Apple iPhone (1st Generation) Apple iPod Touch Apple iPod (Generation 1-5) all other devices which fit with the following dimensions Cradle Dimensions Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Material: Powder Coated Marine Grade Aluminum Ball Diameter: 2,54 cm (1 Inch)

€53.95*
RAM MOUNTS Universal Hardware Set
RAM MOUNTS Universal Hardware Set - Zur Befestigung von Basisplatten an Halteschalen

€8.95*
RAM MOUNTS Adapterplatte mit AMPS Lochraster, gewölbt - B-Kugel
Diese RAM MOUNT Adapterplatte passt an viele Halteschalen.

€29.00*
Verbinder für 1-Inch-Kugel 9 cm mit langem Drehverschluss (RAM-B-201U-ALA1)
Verbinder für 1-inch-Kugel mit langem Drehverschluss

€37.00*
Verbinder für 1-Inch-Kugel 9 cm mit 360° und 180° Drehgelenk (RAP-B-200-2U)
Verbinder für 1-inch-Kugel mit Drehgelenken

€48.00*
Verbinder für 1-Inch-Kugel 9 cm mit 360° Drehgelenk (RAP-B-200-12U)
Verbinder für 1-inch-Kugel mit Drehgelenk

€36.00*
Doppel-Saugfußbasis für gerade Oberflächen (RAM-B-189BU)
RAM Mounts Doppel-Saugfussbasis mit Aufnahme für Basisplatten, die über das AMPS-Lochraster verfügen. Beide Saugfuss-Basen sind jeweils mit Drehverschluss ausgestattet. Material Saugfüsse: Verbundstoff u. GummiMaterial Verbindungsplatte: pulverbeschichtetes AluminiumGrundfläche Saugfuss: 83,82 mm DurchmesserFarbe: schwarzGewicht: ca. 318 gVerpackung: PolybeutelDie Lieferung erfolgt unmontiert - inkl. Befestigungsschrauben für die Verbindungsplatte.

€59.00*
RAM Mounts Tab-Tite Universal Halteschale für bis zu 11 Zoll Tablets - AMPS - Aufnahme, Schrauben
RAM Mounts Tab-Tite Universal Halteschale für bis zu 11 Zoll Tablets  - AMPS- Aufnahme, Schrauben-Set

€53.40*
.