Dear Customer, on 4 November 2025, we will be conducting an inventory. On this day, no parcels can be sent and our shop will be closed. Our vending machine will also be out of service for the inventory. As all our employees will be actively involved in this, we will not be able to offer advice by telephone or email on this day.
With the RAM MOUNTS mounting system, every device and object finds its place in the cockpit. Thanks to the modular system of brackets, connectors and base plates, almost anything is possible. Of course, we also carry complete sets for common situations, which are cheaper in price than the individual modules.
You are still unsure which combination is the right one for you? Then you will find some help here.
Material: Powder Coated Marine Grade Aluminum
Length: 93,7 mm (3,69")
Ball Diameter: 2,54 cm (1")
Weight: approx.145 g
Colour: black
Part number: RAM-B-201U-A
Material: Powder Coated Marine Grade Aluminum
Ball diameter: 2,54 cm (1 Inch)
Size: 62 mm x 33 mm (2,43" x 1,31")
Weight: approx. 46 g
Colour: black
Part number: RAM-B-238U
The RAM MOUNT suction cup twist lock base, contains a standard RAM double hole diamond shaped end. The suction cup is designed to have an extra strong hold on any smooth non-porous surface. For the best result, you should mount it on a glass surface.
Material: High Strength Composite
Diameter: 8,26 cm
Material: Powder Coated Marine Grade Aluminum and High Strength Composite
Ball diameter: 2,54 cm (1 Inch)
Size: 94 mm x 79 mm x 14mm (37" x 31,1" x 5,5")
Opening: 15,8 mm - 31,8 mm (0,625"-1,25")
Weight: approx. 159 g
Part number: RAM-B-121BU
The Cradle consists of a high strength composite. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go.
Material: High Strength Composite
Base Plate Socket: Round
Weight: approx.192g
Part number: RAM-HOL-AP14U
Note:This product is NOT recommended for devices with a Glass Screen Protector. In addition to this you have to remove all kind of cases or sleeves prior useing this cradle.
Material: Powder Coated Marine Grade Aluminum
Length: 60,4 mm (2,38")
Ball Diameter: 2,54 cm (1")
Weight: approx.96 g
Colour: black
Part number: RAM-B-201U-A
Material: Powder Coated Marine Grade Aluminum
Length: 152,4 mm (6")
Ball Diameter: 2,54 cm (1")
Weight: approx. 250 g
Colour: black
Part number: RAM-B-201U-C
Die Gerätehalteschale RAM-HOL-AP17U ist passend für das Apple iPad Air - ohne Schutzgehäuse oder -hüllen. Die Rückseite der Halteschale ist zur Aufnahme von runden Basisplatten (B- oder C-Kugel) vorbereitet. Auch bei eingelegtem Tablet haben Sie weiterhin leichten Zugang zu den Anschlüssen/Schnittstellen des Gerätes. Das patentierte Rollbügelsystem zur Gerätefixierung an der Oberseite sorgt für schonende Einlage und leichte Entnahme des Tablets.
Hinweis: erfordert runde Basisplatte, die gesondert bestellt werden muss!
Produktmerkmale
Das patentierte Rollbügelsystem ermöglicht eine schnelle Einlage und Entnahme des Gerätes
Zwei vorbereitete Verbindungspunkte auf der Rückseite, vorbereitet für die Aufnahme runder Basisplatten (B- oder C-Kugel)
Passend für verschiedene Modelle des Apple iPad - ohne Schutzgehäuse oder -hülle
Die Halteschale eignet sich zum Einsatz in Umgebungen mit geringen als auch mit starken Vibrationen
Aufnahme Rückseite: vorbereitet für runde Basisplatten (B- oder C-Kugel)
Passend für:
iPad 5. + 6. Generation
iPad Air
iPad Air 2
iPad Pro 9,7
The Cradle consists of a high strength composite. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go.
Material: High Strength Composite
Base Plate Socket: Round
Weight: approx.192g
Part number: RAM-HOL-AP14U
Note:This product is NOT recommended for devices with a Glass Screen Protector. In addition to this you have to remove all kind of cases or sleeves prior useing this cradle.
The RAM MOUNT X-Grip® Cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic.
Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your device.
The RAM MOUNT X-Grip Cradle is compatible with the following devices:
Apple iPhone 5
Apple iPhone 4S
Apple iPhone 4
Apple iPhone 3G
Apple iPhone 3
Apple iPhone (1st Generation)
Apple iPod Touch
Apple iPod (Generation 1-5)
all other devices which fit with the following dimensions
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Material: Powder Coated Marine Grade Aluminum
Ball Diameter: 2,54 cm (1 Inch)
The RAM MOUNT X-Grip consists of a spring loaded cradle and 1" rubber ball connected to the back of the base. It expands and contracts for perfect fit of most 7" tablets. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below.
Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875"
Material: Marine Grade Stainless Steel Components and High Strength Composite
Ball diameter: 2,54cm (1 Inch)
Diese stabile X-Grip IV Saugfusshalterung (RAM-B-166-UN10U) eignet sich hervorragend als Universallösung für große Smartphones oder Phablets. Das RAM MOUNTS X-Grip IV System sorgt mit den Gummi-Fingern für sicheren Halt, ohne dabei die Geräte hinter Abdeckungen zu verstecken.
Die RAM MOUNTS Halteklammer ist mit folgenden Artikeln kompatibel:
HTC Droid DNA
Huawei Ascend P1
LG Intuition
Nokia Lumia 920
Pantech Vega No. 6
Samsung GALAXY Mega 5.8
Samsung GALAXY Mega 6.3
Samsung GALAXY Note II
Alle Geräte, welche die folgenden Vorgaben für die Mindestabmessungen erfüllen
X-Grip IV Gerätehalter (Mindestabmessungen):
Minimum Breite = 4,45 cm
Maximum Breite = 11,43cm
Max. Tiefe = 2,22 cm
X-Grip IV Produktmerkmale:
Federgestützte Spannung der Haltearme
Mit Gummi überzogene Haltefinger
Die Vielseitigkeit des Halters macht zahlreiche Halterlösungen möglich
B-Kugel zur Anbindung an zahlreiche RAM MOUNT Produkt
The Clamp is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. When tightened, the 2 composite bolts clamp the base to the lip surface.
Material: Powder Coated Marine Grade Aluminum
Ball diameter: 2,54 cm (1")
Opening: approx. 24 mm (10,2") deep, 28 mm (11") high
Weight: approx.150 g
Part number: RAM-B-259U
Material: Pulverbeschichtetes Aluminium (Saugnapf aus Hochfestigkeits-Verbundstoff)
Kugeldurchmesser: 2,54 cm (1 Inch)
Farbe: schwarz
Hinweis: Gerätehalter muss noch ergänzt werden!
The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material: Powder Coated Marine Grade Aluminum
Ball Diameter : 3,81 cm Rubber Ball (1.5 Inch)
Base Diameter: 6,35 cm (2.5 Inch)
Colour: black
Weight: 105 g
Part number: RAM-202U
Diese X-Grip Saugfusshalterung für Smartphones (RAM-B-166-UN7) besteht aus einer Saugfussbasis mit Drehverschluss einem kurzen Verbindungsarm (ca. 90 mm) und dem X-Grip Universalhalter für Smartphones und kleine elektronische Geräte. Das Kugelsystem ermöglicht nahezu alle Justierungen Ihrer Geräte. Das RAM MOUNTS X-Grip System sorgt mit den Gummi-Fingern für sicheren Halt von Smartphones und anderer elektronischer Kleingeräte, ohne dabei die Geräte hinter Abdeckungen zu verstecken.
Die RAM MOUNTS Halteklammer ist mit folgenden Artikeln kompatibel:
Apple iPhone 6 mit und ohne Schutzhülle
Apple iPhone 5S / 5C mit und ohne Schutzhülle
Apple iPhone 4S mit und ohne Schutzhülle
Apple iPhone 4 mit und ohne Schutzhülle
Apple iPhone 3G mit und ohne Schutzhülle
Apple iPhone 3 mit und ohne Schutzhülle
Apple iPhone (1. Generation)
Apple iPod Touch (alle Modelle)
Apple iPod (Generation 1-5)
sowie alle Geräte, welche die folgenden Vorgaben für die Mindestabmessungen erfüllen
X-Grip Gerätehalter (Mindestabmessungen):
Minimum Breite = 2,23 cm (Geräte mit Minimum-Breite müssen mind. 10,16 cm hoch sein, um gehalten zu werden)
Maximum Breite = 8,26 cm
Max. Tiefe = 2,23 cm
X-Grip IV Produktmerkmale:
Federgestützte Spannung der Haltearme
Mit Gummi überzogene Haltefinger
Die Vielseitigkeit des Halters macht zahlreiche Halterlösungen möglich
Die RAM MOUNT Steuerhornhalterung RAM-B-121-202U besteht aus einer Halteklammer (Öffnung bis zu 31,7 mm), einem mittleren Verbindungsarm (ca. 90 mm) und einer runden Basisplatte. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer um ein Rohr legen und die Schraube festziehen - geeignet für Mietflugzeuge und sonstige mobile Einsatzzwecke.
Hinweis: Gerätehalter muss noch ergänzt werden!
The Cradle consists of a high strength composite. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go.
Material: High Strength Composite
Base Plate Socket: Round
Weight: approx.192g
Part number: RAM-HOL-AP14U
Note:This product is NOT recommended for devices with a Glass Screen Protector. In addition to this you have to remove all kind of cases or sleeves prior useing this cradle.
The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal to mount tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications.
Material: High Strength Composite and Stainless Steel Hardware
Ball diameter: 2,54 cm (1 Inch)
Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5"
Clamping Range (Flat Surfaces): 0" to 1.14"
Die RAM MOUNT Gelenk-Saugfussbasis eignet sich ideal zur sicheren Anbringung an gebogenen bzw. gewölbten Flächen und Scheiben.
€159.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Timezone:
The cookie is used to provide the system with the user's current time zone.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
CAPTCHA integration
Last Seen Product
Payment provider (Stripe) session
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
PayPal payments
Allows Google to collect personal data for online advertising and marketing.
Google Advertising
Brevo:
Brevo tracker
Brevo:
Brevo tracker
StoreLocator:
Allows Google Maps to be loaded on this page.
Shop Search:
Necessary for the appropriate function of our search solution.
Google Tag Manager:
Marketing & statistic cookies are used by third parties or publishers to display personalized advertising. They do this by tracking visitors across websites.
Wishlist
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Product videos:
We use Youtube and Vimeo for our product videos.
Cookies used for statistics and shop performance metrics.
Google Analytics
Google Tagmanager
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Shopware Analytics is an analytics service for tracking shopping behavior on this webshop, provided by shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany) in joint responsibility (see also the data protection information). The legal basis for data processing is Art. 6 para. 1 s. 1 lit. a GDPR. If data is stored locally, please refer to our privacy policy for further details on data processing.
The recipient of the data is shopware AG and IT service providers. Technologies used include local storage. The collected data includes customer group, pages visited, click paths, date and time of visit, information about the end device used (resolution, resolution density, operating system), referrer URL, information about the browser used, locale, search queries, time zone. The purpose of data collection is for marketing, analysis, and statistical purposes.
Data processing takes place within the European Union. If you have any questions about data protection, you can contact the data protection officer at legal@shopware.com. Further information can be found at https://www.shopware.com/en/privacy/website.
Stored data:
Shopware Analytics adds the following information to your browser's local storage until consent is revoked: _swa_anonymousId (a unique identifier of the visitor), _swa_userTraits (user traits of the visitor).
This website uses cookies to ensure you get the best experience on our website. More information.
