Dear Customer, on 4 November 2025, we will be conducting an inventory. On this day, no parcels can be sent and our shop will be closed. Our vending machine will also be out of service for the inventory. As all our employees will be actively involved in this, we will not be able to offer advice by telephone or email on this day.
The RAM MOUNT suction cup twist lock base, contains a standard RAM double hole diamond shaped end. The suction cup is designed to have an extra strong hold on any smooth non-porous surface. For the best result, you should mount it on a glass surface.
Material: High Strength Composite
Diameter: 8,26 cm
Material: Powder Coated Marine Grade Aluminum and High Strength Composite
Ball diameter: 2,54 cm (1 Inch)
Size: 94 mm x 79 mm x 14mm (37" x 31,1" x 5,5")
Opening: 15,8 mm - 31,8 mm (0,625"-1,25")
Weight: approx. 159 g
Part number: RAM-B-121BU
The Clamp is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. When tightened, the 2 composite bolts clamp the base to the lip surface.
Material: Powder Coated Marine Grade Aluminum
Ball diameter: 2,54 cm (1")
Opening: approx. 24 mm (10,2") deep, 28 mm (11") high
Weight: approx.150 g
Part number: RAM-B-259U
Die RAM MOUNT Steuerhornhalterung RAM-B-121-202U besteht aus einer Halteklammer (Öffnung bis zu 31,7 mm), einem mittleren Verbindungsarm (ca. 90 mm) und einer runden Basisplatte. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer um ein Rohr legen und die Schraube festziehen - geeignet für Mietflugzeuge und sonstige mobile Einsatzzwecke.
Hinweis: Gerätehalter muss noch ergänzt werden!
Mit dieser Beinhalterung für den Oberschenkel mit verstellbaren Gummibändern können Sie Ihre elektronischen Geräte nah am Körper platzieren. Die Halterung passt nahezu an alle RAM MOUNTS Gerätehalterschalen.
Material: Hochfestigkeits-Verbundstoff / Gummiband Farbe: schwarz
Die Panelhalterung RAM-B-177-202U besteht aus einer Panelklammer (Öffnung 28mm hoch, 24mm tief), einem Verbinder (60 mm) und einer runden Basisplatte. Diese Universalhalterung ist leicht zu befestigen: einfach die Klammer auf den Panelvorsprung schieben und die Schrauben festziehen - somit ideal für Mietflugzeuge und sonstige mobile Einsatzzwecke geeignet.
Hinweis: Gerätehalter muss noch ergänzt werden!
Stabile Saugfußhalterung aus Verbundstoff mit Trapez-Anschluss zur sicheren Montage elektronischer Geräte an Windschutzscheiben oder glatten Oberflächen.
This article consists of a triple 8,26 cm (3.3") twist lock suction cup base with plate that contains the universal AMPs hole pattern. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass surface.Material:High Strength Composite Colour: black
The RAM MOUNT Tough-Clamp™ includes a 1" ball which can be used to mount a variety of products utilizing RAM's vast selection of mounting solutions. Attach your GoPro Camera, Smartphone, RAM AQUA BOX® Pro or similar light weight device on almost any flat surfaces and square rails.
Clamping Dimensions:
Flat surfaces and square rails from 0" to 1.75" thick
Round rails from 0.75" to 1.125" OD
Ball Size:
1" Rubber Ball "B" Size (2,54 cm)
Features RAM MOUNT Tough-Clamp RAP-B-397-2U:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Swiveling jaw-end pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
1" rubber ball is compatible with numerous RAM arms and mounts
Small, sleek form factor that accommodates for small, tight spaces
Built-in lanyard holes
Quick engage and release of clamp
Lifetime Warranty!
The V-Shape Base consists of a 1" diameter rubber ball connected to a v-shaped base. The base accommodates rails from 1.0" to a maximum of 2.1" in diameter.
To mount the article please place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate.
Material: Powder Coated Marine Grade Aluminum Ball Size: 2,54cm (1 Inch)Colour: black
The Railbase consists of a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails with a diameter of 0.5" to 1.25". The black cover caps icluded can be placed over the exposed ends of the u-bolt to narrow the rail to a minimum width of 0.5".
Material: Powder Coated Marine Grade Aluminum, zinc coated metal
Ball diameter: 2,54 cm (1 Inch)Opening: 12,7 mm - 31,8 mm (0,5" - 1,25")
Weight: ca. 87 g
Colour: black
Part number: RAM-B-231ZU
Die RAM MOUNT Beinhalterung - RAM-BM-L1-SBU besteht aus der Beinhalterung mit Gummizugbefestigung. Die Beinhalterung ist eine ideale Lösung, wenn man ein iPad oder Tablett in naher Umgebung benötigt, oder wenn im Flugzeugcockpit wenig Platz für andere Bef
Die Steuerhornhalterung besteht aus einer Halteklammer (Öffnung bis zu 31,7 mm), einem Verbinder (90 mm) und einer Trapez-Basisplatte. Diese Universalhalterung ist leicht zu befestigen - einfach die Klammer um ein Rohr legen und die Schraube festziehen.Diese Halterung eignet sich ideal für Mietflugzeuge bzw. nicht standardisierte Motorradlenker.
Material: Puder beschichtetes AluminumÖffnung Klammer: bis 31,7 mmKugeldurchmesser: 2,54 cm (1 inch)Farbe: schwarzGewicht: ca. 310 g
Material: Powder Coated Marine Grade Aluminum and High Strength Composite
Ball diameter: 2,54 cm (1 Inch)
Size: 94 mm x 79 mm x 14mm (37" x 31,1" x 5,5")
Opening: 15,8 mm - 31,8 mm (0,625"-1,25")
Weight: approx. 159 g
Part number: RAM-B-121BU
Basisplatte (Trapez):
Material: Puder beschichtetes Aluminum.
Kugeldurchmesser: 2,54 cm (1 Inch).
Breite: 3,2 cm.
Länge: 6,4 cm.
Lochabstand: 4,86 cm (jeweils von der Lochmitte).
Farbe: schwarz.
Verbinder (90 mm):
Material: Puder beschichtetes Aluminum
Kugeldurchmesser: 2,54 cm (1 Inch)
Farbe: schwarz
Gesamtgewicht des Kompletthalters: ca. 180 g
This article consists of a locking tooth system with a standard diamond plate end. The mount will accommodate rails up to 1" in diameter. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Material: High Strength Composite
rail diameter: 2,54 - 2,79 cm
Opening: approx. 24 mm (10,2") deep, 28 mm (11") high
Weight: approx.60 g
Part number: RAP-274
Mit diese Armhalterung mit verstellbarem Gummiband können Sie Ihre elektronischen Geräte nah am Körper platzieren. Die Halterung passt nahezu an alle RAM MOUNTS Gerätehalterschalen.
Material: Hochfestigkeits-Verbundstoff / GummibandFarbe: schwarz
RAM Mounts Doppel-Saugfussbasis mit Aufnahme für Basisplatten, die über das AMPS-Lochraster verfügen. Beide Saugfuss-Basen sind jeweils mit Drehverschluss ausgestattet.
Material Saugfüsse: Verbundstoff u. GummiMaterial Verbindungsplatte: pulverbeschichtetes AluminiumGrundfläche Saugfuss: 83,82 mm DurchmesserFarbe: schwarzGewicht: ca. 318 gVerpackung: PolybeutelDie Lieferung erfolgt unmontiert - inkl. Befestigungsschrauben für die Verbindungsplatte.
€59.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Timezone:
The cookie is used to provide the system with the user's current time zone.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
CAPTCHA integration
Last Seen Product
Payment provider (Stripe) session
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
PayPal payments
Allows Google to collect personal data for online advertising and marketing.
Google Advertising
Brevo:
Brevo tracker
Brevo:
Brevo tracker
StoreLocator:
Allows Google Maps to be loaded on this page.
Shop Search:
Necessary for the appropriate function of our search solution.
Google Tag Manager:
Marketing & statistic cookies are used by third parties or publishers to display personalized advertising. They do this by tracking visitors across websites.
Wishlist
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Product videos:
We use Youtube and Vimeo for our product videos.
Cookies used for statistics and shop performance metrics.
Google Analytics
Google Tagmanager
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Shopware Analytics is an analytics service for tracking shopping behavior on this webshop, provided by shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany) in joint responsibility (see also the data protection information). The legal basis for data processing is Art. 6 para. 1 s. 1 lit. a GDPR. If data is stored locally, please refer to our privacy policy for further details on data processing.
The recipient of the data is shopware AG and IT service providers. Technologies used include local storage. The collected data includes customer group, pages visited, click paths, date and time of visit, information about the end device used (resolution, resolution density, operating system), referrer URL, information about the browser used, locale, search queries, time zone. The purpose of data collection is for marketing, analysis, and statistical purposes.
Data processing takes place within the European Union. If you have any questions about data protection, you can contact the data protection officer at legal@shopware.com. Further information can be found at https://www.shopware.com/en/privacy/website.
Stored data:
Shopware Analytics adds the following information to your browser's local storage until consent is revoked: _swa_anonymousId (a unique identifier of the visitor), _swa_userTraits (user traits of the visitor).
This website uses cookies to ensure you get the best experience on our website. More information.
