BrightLine Bags CS4 - Center Section 4 inch

The CS5 was developed primarily for our IFR Flight Customers. By adding a CS5 to any configuration, you can now add IFR Binders and documents, without having to repack. In addition to IFR equipment, the CS5 is perfect for a couple days worth or clothes, two more sets of headsets, or a 13" laptop. The CS5 is 13.5" x 10.5" x 5". (And remember, it is a soft bag so it can expand slightly in every direction.) The CS5 can attach to all of the FLEX System modules. The CS5 makes a great bag all by itself. By adding end caps you now have an amazing carrying case. One might ask how they access all the equipment/clothes in the CS5. On the CS5 there is top level access. Simply unzip the top zipper, which is also a sunglasses holder, and reach down and grab your items This item does not include a Main Handle or Shoulder Strap. If building a custom bag, make sure your order includes one or both. The CS5 also comes with a divider shelf that is attached to the sidewalls of the compartment by use of Velcro on each end.  The velcro panels on the bag walls are quite large which allows you to move the divider shelf up and down to position the shelf right where you need it for your stuff (or take it completely out if you need). If you have the divider shelf installed, and if you're accessing the bag only from the top access, you won't (of course) be able to get those items underneath the divider shelf. To remedy this situation, (we did think of this occurance) we made it so that you can also zip open the entire rear panel of the module, thereby allowing you to grab all of the items inside, both above and below the divider shelf.  So the CS5 has both top AND side access.  Pretty cool. There are also two FLEX-Mount pocket stations on the outside of the bag, one on each side. You can install any two of your choice of the FLEX System side pockets onto the sides of the CS5 at these stations. The bottom of the bag has two plastic "skid plates" to help keep the bottom of the bag off the ground.

The CS11 was designed primarily for pilots that frequently travel overnight. It will swallow several changes of clothes, a 13” laptop with room for binders and documents, or a small cooler. In addition to aviation, in its B18 Carryall configuration, the CS11 works well in the Law Enforcement and Emergency Medical fields. The CS11 can attach to all of the FLEX System modules.The CS11 has a pocket directly on top for quick access to credit cards, change, small flashlight, etc. Opening the main compartment, one will find a gray interior for finding items easier. The CS11 comes with two vertical dividers for better organization of files, binders, or documents. One can also easily place a 13” laptop inside the main compartment. Remove the vertical dividers to open up the main compartment for clothes, dopp kit, cooler, etcThere are four FLEX-Mount pocket stations on the outside of the bag, two on each side. You can install any four of your choice of the FLEX System side pockets onto the sides of the CS11 at these stations, including the Side Pocket Delta (Double Pocket).The CS11 is the main Center Section of the B18 HANGAR. The B18 consists of two end caps (pocket and flat) a CS11, CS2, CS5, and four pockets. This is the largest Pre-Configured bag in the FLEX System inventory. The B18 allows you to zip in your clothes or extra equipment when traveling, and when done simply remove the center section or sections that are no longer needed. The intent being that you do not have to re-arrange your equipment when changing missions. Simply add and remove the Center SectionsThe CS11 makes a nice bag on its own with end caps. The CS11 was not designed to be used on its own because of the potential damage to exposed zippers. Add pocket and flat caps to complete the fit and finish of the bag. Load your clothes in the CS11, your personal items in the Pocket Cap Front, and your iPad and documents in the Flat Cap Rear, for exampleThe CS11 can also fit onto telescoping suitcase handles. Unzip a zipper on the side of the CS11 and slide the telescoping handle through the opening. This secures the CS11 to the handle. The CS11 will then sit on the top of the luggageThe bottom of the bag has four plastic "skid plates" to help keep the bottom of the bag off the ground.