Ear Pad for David Clark Jet-X headset

€24.00 *

This article will be released on 14 July 2025

Quantity:

Plush, rest-on-ear, leatherette ear seals with memory foam conform snugly to the sides of the... more

Plush, rest-on-ear, leatherette ear seals with memory foam conform snugly to the sides of the head for personalized comfort. Fits DC JET Series headsets.

Scope of delivery

David Clark ONE-X (incl. control module and twin plugs for GA), Headset Bag (black), Quick Start Guide

Close menu

Manufacturer / Publisher:

David Clark

Close menu

Ear coupling: around-the-ear (circumaural)
Hardware: lightweight alloy
Connector type: standard dual GA plugs
Connection cable: 0.155" (4 mm) diameter, OD shielded cable, length approx. 6 ft. (1.8 m)
Weight w/o cable: approx. 12.3 oz. (349 g)
Battery life up to 50 hours (2 AA batteries, not included)
Operating temperature: -20° C to +70° C
Operating voltage: 3V DC (2x AA)
Dome type: ABS
Characteristic SPL: approx. 95 dB SPL (1 kHz, 1 mW) @ maximum volume nominal
Contact pressure approx. 1.4 lb. (6.2 N)
ENC peak attenuation: 30 dB @ 150 Hz
ENC attenuation range: 20 Hz - 1 KHz
Total harmonic distortion (THD): < 1% - 110 dB SPL (300 - 3,000 Hz)
Ear Transducer principle: dynamic
Ear Impedance: 150 mono / 300 stereo (each ear)
Ear Freq Response: 12 - 15,000 Hz
Microphone principle: pre-polarized condenser microphone (electret), noise-cancelling
Mic Impedance: 150 nominal
Mic Sensitivity 400 mV +/- 6 dB into 150 load @ 1kHz for 114 dB SPL input
Mic Freq Response: 150 - 8,000 Hz
Mic DC Supply Voltage: 8-16 V, not polarity sensitive
Source Resistance: 470